Automatic motor stator winding machine common debugging steps and debugging methods

With the continuous development of high-tech technology, mechanical equipment has gradually entered the era of automation, the motor stator winding machine is also so, compared with the traditional winding machine equipment, it can be said that there have been earthshaking changes, of course, the equipment is intelligent, the operation is easy, but the debugging work is relatively more complex, then for the motor stator winding machine, What are the common debugging steps and methods?
 

1. Click and debug

Manually run each mechanism component, observe the normal operation of the mechanism, including winding, wiring, transposing and other actions; Test whether each switch is working; Through PLC programming software, monitor the operation of the program and whether the input signal is normal.

2. Winding without material debugging

The main purpose is to improve the performance of the motor stator winding machine system, prepare for the material test, switch the wiring servo to the automatic arrangement state, press the switch, the spindle starts to rotate, keep the spindle speed constant, and observe whether the movement speed of the arrangement servo mechanism is constant.

3. Winding and material debugging

Motor stator winding machine with material debugging, should be used slow winding, if the operation is normal, there are no problems in all aspects, you can slowly increase the speed, pay attention to the error of the winding, check the wire diameter and wire diameter compensation, if the deviation is large, need to find out the problem in time.
 

Of course, this is only some basic debugging methods, the specific need according to the operation of each component and coordination, debugging to a reasonable state, to ensure that the equipment is stable when running.