Which products is the high-speed six-station internal winding machine suitable for?

Stator winding is a rather troublesome process in the production of brushless motors. It is unrealistic to rely solely on manual winding. Due to the fact that some stators have a large number of turns and some have a large number of slots, production time and efficiency issues must be taken into consideration. Ordinary winding machines cannot meet the requirements, so faster and more workstation winding machine equipment is sought.
 

The high-speed six-station internal winding machine is specifically designed for stator products with thinner wire diameters and more turns, such as high-speed air ducts, small water pumps, rotary transformers, stepper motors, industrial fans and other motor stators. It not only has a fast winding speed but also multiple stations, meeting your production needs.

Production advantages of high-speed six-station internal winding machine:

It can simultaneously wind six stator products at high speed, and the winding working speed can reach 1000r/min.

2. It can precisely arrange wires while high-speed winding, with unlimited changes from 4 to 36 slots.

3. The number of turns can be over 500.

4. The equipment chassis adopts an 8mm square tube welding process to ensure stable high-speed operation.
 

Of course, not all stator products are high-speed six-station internal winding machines. If the wire diameter is very thick, the stator is relatively complex, or the production demand is not very large, two-station equipment should be adopted as much as possible.