How to use the motor stator winding machine equipment correctly?

Many friends have purchased automatic winding machine equipment, but they don't know how to use it correctly, which leads to various problems. So, how to use the motor stator winding machine equipment correctly? What details and methods should be noted? Below,NOYU will simply introduce it to you! 
 

To use the motor stator winding machine equipment correctly and ensure safe and efficient operation, the following details and methods should be followed: 
I. Preparation Work: 
1.Determine the working mode of the winding machine and select the manual, automatic or electric mode as needed. 
2. Prepare the corresponding molds according to the size and shape of the stator, and ensure that the polishing and precision meet the requirements. 
3. Select the appropriate wires and ensure that the specifications and models of the wires match the requirements of the equipment. 
4. Inspect the equipment to ensure that the controller, electrical devices, wiring devices, molds, etc. are all in good condition. 
II. Safe Operation: 
1.Operators need to undergo training to be familiar with the structure, performance and basic operating procedures of the equipment. 
2. Before operation, put on the necessary personal protective equipment such as gloves and safety glasses, and take all necessary safety precautions. 
3. Non-professional operators are strictly prohibited from approaching the equipment to ensure the safety of the operation area. 
4. Before starting the machine, a no-load test run should be conducted to check the sensitivity and reliability of the equipment's operating system, devices, and foot switches. 
III. Steps: 
1.Based on the stator winding diagram, prepare the corresponding winding program or import an existing program. 
2. Manually adjust the equipment to ensure that the line nozzle and needle rod operate normally and accurately, and avoid colliding or scratching the stator base. 
3. Try to run with the wire, and observe whether the steps of winding the wire, winding the rod, arranging the wire, moving the wire, and cutting the wire are correct. If there are any abnormalities, make timely adjustments. 
4. Once there are no issues, gradually increase the running speed and complete the winding process. 
5. The properly wound coils should be carefully placed in the designated areas to avoid damage. 
IV. Notes:
1.During the operation, pay attention to whether the power voltage meets the requirements of the equipment. Do not随意change the power supply. 
2. Keep the equipment clean and hygienic to prevent impurities from entering the equipment and affecting its normal operation. 
3. Pay attention to the environmental temperature. Do not allow the equipment to overheat, as this will shorten its lifespan. 
4. Regularly inspect the vulnerable parts of the equipment, such as bearings and transmission systems. If any damage is found, replace them immediately. 
5. During use, if any abnormal situation occurs, such as unpleasant smell or smoke, the machine should be immediately shut down and the cause of the fault should be checked. 
V. Maintenance and Repair: 
1.When leaving work, it is necessary to promptly clean and maintain the equipment to keep it in good condition. 
2. Regularly maintain the equipment, such as lubrication and tightening, to ensure its normal operation. 
 

How to use the motor stator winding machine equipment correctly? What details and methods should be noted? According to the methods mentioned above, I believe they will be helpful to everyone!